Enlaps Mounting kit For Tikee Arm

The Enlaps Mounting Kit provides you with wider installation options for the Tikee arm through a complete mounting kit that supports installation on walls, concrete, wooden structures, and multi-shaped structures, allowing you to set up your shooting location quickly and securely.

Features of the Enlaps Mounting Kit

• A practical solution within photography tools to expand the installation options for the Tikee arm on various surfaces, including hollow or solid walls.
• Adjustable metal clamps to secure the arm on circular, rectangular, triangular, or polygonal structures with a maximum circumference of 1099 mm and a maximum diameter of 350 mm.
• Rubber strips to protect the supporting surface under the clamps and reduce slipping, which can be cut as needed.
• Includes a bubble level to facilitate leveling during installation for a more precise setup.
• Clear and visible content for the kit includes long metal clamps with a tension mechanism, screws, plugs, and washers, making it a suitable addition to professional photography equipment.

Specifications of the Enlaps Mounting Kit

• Compatibility: Designed for mounting the Tikee arm.
• Plugs: 4 UX plugs sized 6×35 for installation in concrete and hollow or solid walls.
• Screws: 4 wood screws 4×20 for installation on wooden structures.
• Washers: 4 M4 washers to improve pressure distribution and connection stability.
• Level: 1 bubble level for leveling during installation.
• Metal clamps: 2 adjustable metal clamps, maximum diameter 350 mm, and maximum circumference 1099 mm.
• Rubber strips: 2 protective rubber strips, thickness 2 mm, length 1099 mm, width 20 mm.
• Non-included installation requirements: Drill with a 6 mm bit for installing plugs, a Phillips or Pozidriv screwdriver for tightening screws, and clamps can be tightened with a flat or Phillips screwdriver or a 7 mm wrench.